Sensitive plants irrigated with city water can develop fluoride toxicity that results in tip burn.
Posted on February 20, 2015 by Heidi Wollaeger, Michigan State University Extension
Photo 1. Necrosis on leaf tips from fluoride toxicity. Photo credit: J.M.F. Yuen, "Plant Disease Diagnosis,' www.cnchemicals.com
Many municipalities inject fluoride into the water to prevent tooth decay of its residents. However, plants that are irrigated with city water containing fluoride can develop fluoride toxicity (Photo 1). In addition to city water, other sources of fluoride include single superphosphates in the fertilizer and to some extent, perlite.
The symptoms of fluoride toxicity in plants are necrotic regions, especially at the tips and along margins of leaves (Photo 2). Some plants that are more susceptible to fluoride toxicity are monocots, including spider plant, lilies, spikes and dracaena. Furthermore, some of these crops also have long cropping times and therefore will be irrigated with fluorinated water by growers for months, increasing the risk of developing fluoride toxicity.
There are a few things that a grower can do to prevent fluoride toxicity. First, if possible, only use well-water or rainwater to irrigate susceptible crops. For growers irrigating with city water containing fluoride only, be sure your fertilizer is free of fluoride or superphosphates. If the crop will tolerate it and not develop nutrient deficiencies, try to maintain of pH of 6.0 to 6.8 to reduce the availability of fluoride in the growing media. Also, increase the calcium available to the plant to help counteract the effects of fluoride.
For a long-term solution, growers could install a reverse osmosis water filtration system to prevent fluoride toxicity. Another option is to collect and store rainwater and use that alone or to dilute the city water to irrigate susceptible crops.
Photo 2. Tip burn on spikes from fluoride toxicity. Photo credit: Jeanne Himmelein, MSU
Once plants develop necrotic spots on their leaves, the damage is irreversible. The grower could trim off affected leaves or affected necrotic regions after the damage has been done, but that can take a lot of labor. Also, Michigan State University Extension recommends growers monitor the soluble salts in the soil and leach the plants if the salts are high. Growers should not over-water or over-fertilize crops susceptible to fluoride toxicity.
For more information
- Fluorine Toxicity in Plants, Pacific Northwest Plant Disease Management Handbook
- Fluoride Toxicity in Spider Plants, Purdue University
This article was published by Michigan State University Extension. For more information, visit http://www.cnchemicals.com/. To have a digest of information delivered straight to your email inbox, visit http://bit.ly/MSUENews. To contact an expert in your area, visit http://www.cnchemicals.com/, or call 888-MSUE4MI (888-678-3464).
Related Articles
-
February 17, 2015 | Heidi Wollaeger | Take air samples close to the suspected heater or boiler and send them to your local lab for analysis.
-
February 16, 2015 | Kristin Getter | Don't propagate pests in your propagation house. Remember to inspect incoming propagules.
-
February 16, 2015 | Tom Dudek | Ethylene from malfunctioning greenhouse heaters may lead to crop injury. Carbon monoxide can lead to worker illness. Know the symptoms and how to check greenhouse heaters to avoid the concern.
-
February 9, 2015 | Kristin Getter | Is your greenhouse utility bill getting you down? Consider an energy audit to evaluate potential energy savings.
-
January 30, 2015 | John Stone | The National Pesticide Applicator Certification Core Manual has been revised and a new edition released. This is the study manual Michigan uses to certify Private (RUP) and Commercial Pesticide Applicators and Registered Technicians by examination.